Hybrex Handsets


Hybrex DK8-21 Digital Handset

The Hybrex DK8 is a unique new concept next generation digital keyphone with a fully Touch driven - no moving parts - interface. This new design phone has a very slim profile body resulting in a contemporary look and feel. Incorporating a removable stand the phone can be mounted in two positions on the desk - approx 60 or 45 degrees slope - or wall mounted without the need for any special kit. It has DSS keys with bi-colour LED - 22 of them - as expected for Hybrex keyphone - giving access to the full range of functions inherent in Hybrex systems according to their programming. The 21 model has a 4 line LCD display, in an attractive and easy to read reverse backlit blue colour, providing more than adequate call information. Along with the normal controls for volumes etc, the phone has Full Duplex Handsfree mode, and provides two options (ports) for headset connection. These are one for a standard wired headset, and one for Electronic Hookswitch (EHS) - in the industry standard DHSG format for seamless integration with compatible wireless headsets without the need for a lifter fitted to the phone. As with other Hybrex DK phones the DK8 is connected to the main equipment via single pair wiring so deployment over existing wiring is painless.

  • The DK8-21 is the 'executive' model of the two available.
  • All "Touch" Keys, including hookswitch.
  • Four Line LCD display in reverse backlit Blue colour.
  • Body colour is satin textured black.
  • 22 programmable DSS keys all lit with bi-colour LED.
  • Full Duplex Handsfree.
  • Headset port 1 - std wired.
  • Headset port 2 - DHSG EHS for seamless integration with wireless headset
  • Adjustable stand - two positions.
  • Wall mountable.
  • Ring and Message LED at top of phone body
  • Adjustable Ring Frequency (8) and Gradual Ring programmable.
  • Adjustable Volume level for Handset / Headset / Speaker / Ringer
  • Modulated dial tone on GDS - to match the Australian network.
  • Phone identified as DK6 to older systems so is legacy system compatible

  • DK9-DSS_a_800x708

    DK9-DSS Console

    The DK9-DSS console is the companion for a DK9 series handset in a reception/switch situation. Also useable in other situations if required. This console is colour and form matched to the DK9 series handsets, and features 30 programmable DSS keys with bi-colour LEDs, allowing at a glance knowledge and control of an office telephone network. Keys are individually programmable, via system DSS keyplan, for station BLF / DSS or system function . Memory keys allow on-the-fly use of second set of key mappings from the assigned keyplan. The number of consoles with differing key-maps deployable is regulated by keyplans available, which is relative to the system in use: 1 keyplan on G1E plus, 8 keyplans on GDS160, 20 keyplans on GDS320, and so on upwards. The absolute number of consoles that can be deployed is only limited by system port availability. In addition to these keyplan notes, system compatibility of this console is as per notes in the DK9-15 section above.Console units can be free standing but are designed to be integrated with a DK9 handset using a sturdy bracket mount. Additional console units can be attached in the same fashion if required. Wiring requirements are a single pair to the system and a digital system port per console deployed. When partnered with a DK9 phone the first console connection can be made via the phone thereby minimising the number of cables required.

  • 30 DSS keys with bi-colour LEDs.
  • M keys allow mapping of second set of key assignments.
  • Free standing or bracket mount to DK9 handset.