Hybrex Doorphones

ACD20_Hyb_Rm_3_3491_331x600

Hybrex ACD20 Access Control Device

The new Hybrex ACD20 is an RFID device designed to allow unattended portal access to authorised personnel by RFID card/fob swipe, and according to system programming for card, door - or other unit/function, and time of day. The ACD20 contains a MiFare RFID reader/writer, a relay for control of master door relay or other device, and two sensor inputs. The sensors can be used for a remote switch door open function - like a push button inside the premises, or other uses according to system programming. MiFare RFID cards and key-fobs are available from Hybrex, and must be registered with the system to be valid. The ACD20 is designed for wall mounting, is IP44 rated, has a disconnect alarm, and is small and inobtrusive - being sized to fit a normal door jamb. It has LED illuminated logo and card indicator for easy visibility in low light and at night. The card indicator and an internal sounder provide feedback on card swipe status. The ACD20 is a digital device connected and powered via a single pair from the main equipment and is compatible with all current Hybrex G Series systems.

Features:
  • Integrated Mifare reader/writer
  • Relay with NO/NC contacts for control of other equipment
  • Two sensor inputs for programmable usage
  • Illuminated logo and card indicator for low light / night visibility
  • Visual and audible feedback of card swipe status
  • Self-Defense (un-plug) alarm
  • Powered and operated by single pair digital wiring from system

    (nb. this is not including any relay/sensor wiring)

  • Electrical Specification :
  • Output : SPDT Relay : Contact Rating 1A / 30VDC
  • Input : 2 x Sensor Cct : Dry Connection : - Open loop > 470KOhm; Closed loop < 100 Ohm.
  • Powered from system (35~40VDC); Consumption : 100mA
  • ACP40_L_0697_Hybrex_750x469

    Hybrex ACP-40 Doorphone

    The Hybrex ACP40 is a fully featured doorphone / intercom with a touch interface. Housed in an aluminium case with a sealed front fascia and rear facing speaker, the ACP40 is IP44 rated meaning it is weather resistant and therefore suitable for sheltered exterior use if required. The aluminium case is finished in a deep blue varnish and the fascia is black. The ACP40 is equipped with a high visibility two line OLED display for status and messages, and a dial pad and function button set consisting of directory, program, and Call buttons. All buttons are backlit for easy use in low light conditions and provide audible and visual confirmation of use along with display messaging.The ACP40 includes an integrated MiFare RFID reader allowing MiFare cards or tags to be used to automatically trigger the door relay - according to system programming - so allowing the ACP40 to also provide unattended portal access to authorised personnel if desired. According to system programming portal access can be configured to allow door relay operation by entry of a numeric code via the keypad, MiFare card read, or both methods together if required.The ACP40 is a digital device connected and powered via a single pair from the main equipment and is compatible with all current Hybrex G Series systems. The ACP40 has two sets of dry relay contacts to control devices - such as doorlock solenoid and a camera or light for example, plus a sensor for uses such as alarm, and includes self defense features such as a case open alarm and an unplug alarm.

    Features:
  • Built-In Mifare reader
  • Keypad: Touch sensitive dial pad, function buttons, and call button
  • Intercom for indoors use
  • Door control
  • Door status indication
  • Self-Defense (un-plug) alarm
  • Case open alarm
  • One relay will activate immediately an Intercom Call is initiated and remain active for the duration of the call.
  • Keypad, function, and Call buttons backlit for easy low light use
  • 8 level speaker volume - controlled by system programming
  • 8 level microphone volume - controlled by system programming
  • Remote volume adjustment
  • Power over Line (PoL)

  • ACP30_0344_500x761

    Hybrex ACP-30 Doorphone

    The Hybrex ACP30 is a single button doorphone / intercom with a touch interface. Housed in an aluminium case with a sealed front fascia and rear facing speaker, the ACP30 is IP44 rated meaning it is weather resistant and therefore suitable for sheltered exterior use if required. The aluminium case is finished in a deep blue varnish and the fascia is black. The call button and logo are backlit in blue for easy visibility in low light or darkness and the call button backlight changes to white in the active state.The ACP30 is a digital device connected and powered via a single pair from the main equipment and is compatible with all current series Hybrex G Series systems. The ACP30 has two sets of dry relay contacts to control devices - such as doorlock solenoid and a camera for example, plus a sensor for uses such as alarm, and includes self defense features such as a case open alarm and an unplug alarm.The ACP30 is available in two models : the ACP30-D which is as above, and the ACP30-RFID which has an integrated MiFare reader allowing MiFare cards or tags to be used to automatically trigger the door relay - according to system programming - so allowing the ACP30 to also provide unattended portal access to authorised personnel if desired.

    Features:
  • Built-In Mifare reader - (ACP30-RFID model only)
  • Keypad: Touch sensitive call button
  • Intercom for indoors use
  • Door control
  • Door status indication
  • Self-Defense (un-plug) alarm
  • Case open alarm
  • One relay will be activated immediately after initializing the Intercom Call - and will remain active for the duration of the call.
  • Button illuminated by backlight lamp for night use
  • 8 level speaker volume - controlled by system programming
  • 8 level microphone volume - controlled by system programming
  • Power over Line (PoL)